Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, even 1/8" risers can help keep your hardware in place. Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, 1/8" risers can help keep the hardware from vibrating loose.
Easily brighten your complete with multicolor black, blue, yellow, red, orange, and green screws and nuts in a 7/8" sizing and Phillips head configuration. 7/8" (.875") sizing. 3 black, 1 blue, 1 yellow, 1 red, 1 orange, and 1 green screw. 3 black, 1 blue, 1 yellow, 1 red, 1 orange, and 1 green nuts. Phillips head design. Note: Won't fit board with risers.
Easily brighten your complete with multicolor black, blue, yellow, red, orange, and green screws and nuts in a 1" sizing and Phillips head configuration. 1" sizing. 3 black, 1 blue, 1 yellow, 1 red, 1 orange, and 1 green screw. 3 black, 1 blue, 1 yellow, 1 red, 1 orange, and 1 green nuts. Phillips head design.
Build up your perfect board with the Independent Genuine Parts Skateboard Hardware. This hardware is specified to the highest standards. Each set contains 6 black bolts and 2 gold bolts. Genuine Parts Phillips hardware features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended unthreaded shafts for minimal board damage.
Phillips Head Hardwear 6 black bolts and 2 gold bolts 1 inch length
Build up your perfect board with the Independent Genuine Parts Skateboard Hardware. This hardware is specified to the highest standards. Each set contains 8 blue bolts and 2 black bolts. Genuine Parts Phillips hardware features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended unthreaded shafts for minimal board damage.
Phillips Head Hardwear 8 blue bolts and 2 black bolts 1 inch length 1 Independent Skate Tool Key Chain
Almost Gold Nuts & Bolts. Almost Gold Nuts & Bolts. Allen 1" hardware. Gold nuts and bolts. Set of 8. Allen key. Includes rubber "Gold Fronts" coin pouch.
Glow In The Dark Skate Rails from Creature. Light yellow colorway with black logo script and checker print. Includes 2 rails and 10 wood screws. Length: 15.0" Width: 0.75"
Riser pads, or risers, are hard plastic pads that can be inserted between the skateboard trucks and deck to raise the overall height of the skateboard. They are used to avoid wheel bite, which occurs when the wheel rubs the skateboard deck during a turn or just after a trick.
We recommend 1/2" risers for wheels greater than 65mm in diameter. 1/2" risers require longer hardware too. We recommend 1-1/2" hardware.
Riser pads, or risers, are hard plastic pads that can be inserted between the skateboard trucks and deck to raise the overall height of the skateboard. They are used to avoid wheel bite, which occurs when the wheel rubs the skateboard deck during a turn or just after a trick.
We recommend 1/4" risers for wheels between 65mm-67mm in diameter. 1/4" risers require longer hardware too. We recommend 1-1/4" hardware.
Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, even 1/8" risers can help keep your hardware in place. Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, 1/8" risers can help keep the hardware from vibrating loose.
Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, even 1/8" risers can help keep your hardware in place. Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, 1/8" risers can help keep the hardware from vibrating loose.
Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, even 1/8" risers can help keep your hardware in place. Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, 1/8" risers can help keep the hardware from vibrating loose.